{Disarmed} So you can clean the charging connector of your Xiaomi Watch or Mi Smart Band to avoid performance problems
Many of you who read us daily have told us that problems have arisen when charging your watch or smart bracelet , and it is that they do not make correct contact with the official charger and are not capable of receiving the necessary energy from time to be able to charge its internal batteries normally.
For this reason, in this post we are going to show you a trick that can save you from having to go through the technical service since, on certain occasions, this problem can be derived from poor maintenance of the charging pins of the devices, for what is extremely important to keep them in good condition so that they do not fail.
First of all, check that the charger works correctly
Of course, before showing you how you can keep the charging pins in good condition, it is extremely important that you check that the official charger you use works correctly.
To be able to check it, you can always use the classic voltmeter and check that everything works as it should, but we are aware that not all people have a tool of this type in their homes.
For this reason, a trick that you can use is to try this charger with another device that is not yours to make sure that it works and, in the event that it does not, you will also have to make sure that you try another different charger on your watch or smart bracelet to rule out that the problem is the pins of the equipment itself.
Another problem that can arise is that the pins are oxidized , and this is because if we use our watches or bracelets in salt water or other types of liquids and do not dry them properly, it can cause rust to form, having to use products. specific or even file that surface.
When cleaning the pins, avoid corrosive products
Once it has been clarified that our charger works as it should but does not make the contact it should, it is time to clean the pins to avoid possible future problems and that the entire charging process is carried out correctly.
Whenever we handle electronic devices, it is best to use products that are not corrosive to avoid possible long-term damage to the equipment and, once the cleaning is done, we dry the entire surface well so that everything works well.
Our recommendation is that you use products such as alcohol or distilled water to clean this type of device, since they are liquids that can dry easily and do not pose a problem for the correct operation of the equipment.
The easiest way to be able to handle these parts that are so small in size is to apply the liquid to a cloth that does not have any type of dirt and, immediately afterwards, clean the surface correctly until we see that everything is free of dirt and dry it thoroughly. consciousness to be able to test the charger immediately.
-
The news This is how you can clean the charging connector of your Xiaomi Watch or My Smart Band to avoid performance problems was originally published in xiaomist by Daniel Vega .
Comments
Post a Comment