Skip to main content

Featured Question

Vodafone: 30 GB Allnet Flat for 12.99 euros/month

Freenet still has a real Vodafone tariff cracker on offer until next Monday. You can get a whopping 30 GB of LTE data volume for just EUR 12.99 a month. This is a 24-month contract, after which it becomes more expensive. LTE 50 speed in the Vodafone network, VoLTE, WLAN Call and a flexible contract start as well as eSIM sound good. Unfortunately, a connection fee of EUR 9.99 is also due, which spoils the successful package a bit. The tariff details at a glance: 30 GB LTE data volume with up to 50 Mbit/s Vodafone network FLAT telephony + SMS FLAT EU roaming VoLTE & WiFi call capable eSIM possible Flexible contract start possible EUR 12.99/month 24-month term EUR 9.99 connection fee The post Vodafone: 30 GB Allnet Flat for 12.99 euros/month first appeared on xiaomist's blog .

xiaomi mi robot vacuum review

Xiaomi Mi Robot Vacuum Cleaner

Xiaomi Mi Robot Vacuum Cleaner
Xiaomi Smart Robotic Vacuum Cleaner has 12 sensors with 360 ° clearing capabilities

Intelligent route planning
Powerful suction power 1800 Pa
Remote control by application
Li-ion battery 5200 mAh

Super smart vacuum cleaner

Intelligent route planning
Powerful suction power 1800 Pa
Remote control by application
Li-ion battery 5200 mAh

Intelligent planning
Robotic vacuum cleaner is a highly intelligent home cleaning system with 12 different sensors.

The three different processors track their movements in real time and compute the data using the Localization and Coordinate Mapping (SLAM) algorithm to determine your home layout and determine the best sweep path.

LDS sensor
Multiple sensors
Three processors
SLAM algorithm
Laser Distance Sensor (LDS)

The Laser Distance Sensor (LDS) lets you scan your robot around 360 degrees and 1800 times per second, showing the interior of your home.

Scan 360 degrees
Measured 1800 times per second
Maximum range 6 meters
Measurement error ≤ 2%
Three processors

To provide greater location stability, the device has three specialized operators that track their movements in real time, calculate the location and determine the best paths.

Allwinner ARM Cortex A7 quad-core processor
TI digital signal processor
ST ARM Cortex M3 microcontroller
High Sensitivity Sensor System

Xiaomi Robotic Vacuum Cleaner uses a set of 12 sensors - including ultrasonic radar sensors, rocker sensors, gyroscopes, and accelerometers - to create your home interior design map.

Digital sensor
Dustbin Sensor
Collision sensor
Ultrasonic Sensor Radar Sensor
Laser Distance Sensor (LDS)
Electronic compass
Cliff Sensor
Gyroscope
accelerometer
Drop Sensor
Speedometer
Fan speed sensor

SLAM - Simultaneous localization and mapping algorithm

Based on sensor data, the robot uses the SLAM algorithm.

This algorithm is used in the mapping of unknown regions with the possibility of updating the map to calculate the best cleaning path.

The robot starts cleaning with Edge cleaning and Zigzag cleaning.

No problem or worry
After cleaning, the robot automatically returns to the charging stand and is automatically charged. When charging is less than 20%, it charges up to 80% and continues to work unfinished.

Automatic charge
Powerful and sturdy

Using a brushless DC motor to create air pressure up to 1800 Pa, this low-noise and high performance motor. The main floating point automatically adjusts the height to provide better contact with the floor to remove the entire dirt on rugged surfaces. Side brush adjusts the rotational speed according to the type of cleaning.

Low noise DC motor
Original floating brush
Dynamic Side Brush
Powerful suction power 1800 Pa

Cleaning the edges to a precision of 10 mm
Using a wall sensor, the robot maintains a 10mm gap between the walls and cleans the edges effectively with a brush.

The brush is attached to the screw, so you can easily replace or remove it if necessary.

Smart and beautiful
The robot consists of 7 parts in a modular structure and has a beautiful white finish. Continuous IMR coating, high-strength ABS materials, processing surfaces and lower part-all of this proves once again that the robot vacuum cleaner from Xiaomi will be your best choice.

To clean the robot vacuum cleaner, you must open the door to remove garbage. Optionally, you can clean the filter. The original brush is also easily removable and there is a special shoulder to clean it.

High-capacity lithium ion battery at 5200 mAh
The robot has a lithium-ion battery of 5200 mAh, which lasts up to 2.5 hours of full charge. You do not have to worry about the electric charge. The CC and CV charging system, specially designed, guarantees a lifetime of up to 2 years of battery life.

2.5 hours of automatic charge charge
250 square meters cleaning with one charge
Safety Guarantee

A battery with stainless steel cover and PTC / CID protection. The battery and adapter use a chip-controlled charger and are equipped with various protection systems.

Overcharge protection
Overcharge discharge protection
Overheating protection
Short circuit protection
Overvoltage protection
Remote control with the app

The ability to work with the Mi Home App allows you to control the device on and remotely, see progress at the current time, change the cleaning mode, and set up automatic programs.

To run the Xiaomi Mi Robot vacuum cleaner, you must turn it on and wait for the connection to the program. After connecting, you will see information about the clean area, the remaining battery power, the time it takes to clean.

Remote control
Cleaning planning
Cleaning mode
Monitor at the moment

Comments

Popular Questions This Week

What is VoLTE and how can you activate it on your Xiaomi

In recent years, phone calls have evolved to achieve great sound quality. So much so that today we can find technologies such as VoLTE allowing us to make voice calls in high definition on our Xiaomi. Beyond the classic GSM networks, movistar, vodafone and other operators have integrated this technology, which in turn derives from the advantages of Internet access. Thanks to 4G or LTE networks, VoLTE allows us to make not only high-definition calls, but also to improve consumption and add other services . What is VoLTE and what are its advantages after activating it on a Xiaomi In detail, VoLTE is a technology capable of transmitting voice communications over the Internet . For this, whether we have a Redmi Note 8 Pro, a Xiaomi Mi A2 or any other smartphone from the firm, our voice will be encoded from analog to digital allowing its transmission in the form of packets through the network. With this, as we have already said, after activating VoLTE we will achieve higher sou

How to exit the FASTBOOT mode of your Xiaomi if you have entered accidentally

Although, the fastboot mode of Xiaomi phones with MIUI allows us to solve bugs or change ROMs, it is also common to enter without wanting to. If this has been your case, you most likely want to get out of Xiaomi's fastboot without spoiling anything. In general, leaving this mode that includes all Xiaomi, Redmi and POCO with MIUI is extremely simple. Even so, on certain occasions, exiting fastboot mode is more complex , either because Recovery starts or because our smartphone does not work correctly. In view of this, below we are going to explain how to exit the fastbook mode of your Xiaomi if you have entered without wanting to . In addition, if the conventional mode does not work, we will also give you other tips to exit this mode without causing any damage at the software level. How to exit Xiaomi fastboot If we have accidentally entered the Xiaomi fastboot , to exit this way we will only have to perform the following steps: Press and hold the power button for about 10

So you can check the battery status of your Xiaomi smartphone and how many cycles you have performed

Today, our smartphone has become one of the most important tools in our day to day. That is why the duration of its battery and the state of it is very important if we want to be able to use it with total peace of mind and in a continuous way. In view of this, MIUI includes a secret menu that allows us to verify the state or health of the battery of our Xiaomi smartphone and also check the cycles that we have performed . Let's not forget that each cycle represents a full battery charge from 0% to 100% Since lithium batteries degrade with the passage of time , use and recharges that we have made, knowing these two data will give us a vision of the general state of your state and with it knowing if it has worsened considerably with the passage of weather. How to check the battery status and cycles performed on our Xiaomi smartphone To access this hidden menu in MIUI and check the battery status of our Xiaomi smartphone we will only have to perform the following steps:

Problems with Android Auto and your Xiaomi? So you can fix it

Unfortunately Android Auto continues to present certain problems on some Xiaomi . Errors such as error 16 that prevent our smartphone from correctly linking to this Google vehicle system. Still, these bugs are largely solvable. And it is that, in most cases the impossibility of using Android Auto through our Xiaomi is given by the dual applications themselves. In view of this and taking as a source this interesting article from Mi Community , below we will explain how to solve two of the most common errors that we usually find when linking or connecting our Xiaomi to a car with Android Auto. Fix Android Auto error on Xiaomi devices One of the main errors of the type « An error has occurred » that we usually find when connecting Android Auto to our Xiaomi is related to Google Play Services . In itself, this error shows the message « It seems that Google Play Services does not work at the moment «, making it impossible to connect Android Auto to our Xiaomi. To solve it we j

Does your Xiaomi charge slowly or intermittently? So you can fix it

Does your Xiaomi charge very slowly or intermittently? This error is usually very common when our cable is in poor condition, we use a low-quality charger or even when the USB or USB Type-C port of your Xiaomi is dirty or obstructed. With a view to this, below we will explain the main steps or solutions to take if your Xiaomi charges slowly , if the charge is intermittent or if in the worst case, your mobile does not detect the USB that is connected to the socket electric. 1. Clean the USB port Although it may sound simple, in most cases slow charging problems are usually caused by a piece of paper or a speck of dust that obstructs the pins of the USB port . Taking into account the nature of this connector, it is normal that after repeated use dirt accumulates inside. A dirty USB C port is usually the main cause of slow or intermittent charging. To solve this charging problem and clean the USB C port of your Xiaomi, it is recommended to blow lightly inside the port itself.

If your Xiaomi disconnects only from the WiFi it may be because of that MIUI setting

One of the most common problems in Xiaomi smartphones is usually related to the WiFi connection and its automatic disconnection . A quite annoying problem, which in most cases is usually caused by a bad MIUI configuration . If you have a Xiaomi, Redmi or POCO and you notice that sometimes your smartphone disconnects only from the WiFi without having taken any action, do not miss this article where we tell you how to solve it in most cases. Disconnection of WiFi on your Xiaomi, how to solve it Although it is true that the problem may be caused by some other failure, in most cases the spontaneous disconnection of the WiFi connection is caused by a bad MIUI configuration, specifically, its automatic connection to the networks with better signal . By having this option activated on our smartphone, if the WiFi signal drops at any time, it will automatically disconnect to use the data connection . To deactivate it enough to do the following steps: Go to Settings> WiFi> Wi-Fi

Improve and amplify the volume of your Xiaomi and / or headphones with these simple adjustments

With the evolution of technology and the arrival of content on demand, many of us spend much of the day with our headphones on, playing music or watching series and movies. That is why many of you have asked us how to increase the volume of the headphones in Xiaomi smartphones or even how to improve the sound quality in Xiaomi AirDots or Redmi AirDots S wireless headphones. How to improve the sound and increase the volume of the headphones in MIUI of Xiaomi If what we want is to increase or amplify the volume of our headphones on a Xiaomi smartphone with MIUI we must perform the following steps: Go to Settings app> Region We will change our region to Andorra, India or any other country outside the EU. With this adjustment we will be able to "skip" the European restrictions that limit the sound volume, obtaining greater amplification , both in headphones, and through the speaker itself. Headphones with cable and jack connector Xiaomi Mi Hybrid Pro HD. In add

How to change the font in MIUI and thus further customize your Xiaomi: so you can change the type, color and size of the letters of MIUI

Among the multiple options that MIUI offers us we find the possibility of changing the source of our Xiaomi . This option will not only allow us to change the font , but also change the font color and size . For this it is necessary to make use of some Asian region, be it India, Hong Kong or any other. In addition, it should be noted that this adjustment that allows us to change the source is only available for MIUI 9 , MIUI 10 and MIUI 11 , so if we have a Xiaomi Mi A2 or Xiaomi Mi A3 we will not be able to do it. How to change the font in MIUI To change the font in MIUI we must perform the following steps: Go to Settings> Additional settings> Region Next we select India or Hong Kong as a region. Go to the Themes application, download the font that we like the most from the new lower option that will appear with hundreds of fonts and then apply it. After applying it, it will be necessary to restart our Xiaomi mobile. Once done , we will have installed the ne

What is the Safe Mode of your Xiaomi, what is it for and how can you activate it

In addition to the typical options that we find in the MIUI settings, Xiaomi also adds a mode called " Safe Mode " or " Safe Mode " to its smartphones. We will talk about this below, explaining its usefulness and how to activate or deactivate it on your Xiaomi, Redmi or POCO. Safe Mode allows us to start a special boot, loading only the system itself and the applications that were installed on our Xiaomi when we bought it. That is, starting the Safe Mode or Safe Mode our smartphone will start loading only the essential applications . This mode is a temporary state of our smartphone and does not make any important modification on the device. In itself, Safe Mode does not delete our data , it just starts our Xiaomi, loading the basics and essentials for its operation. Safe Mode only starts essential MIUI applications. Thanks to this, the Safe Mode will help us to rule out failures in our Xiaomi derived from the installation of an application or the modific

How to calibrate the proximity sensor of your Xiaomi

The proximity sensor forms one of the fundamental parts of a smartphone. Whether it is in a Xiaomi Mi A3 , a Redmi Note 8 Pro or any other smartphone from the firm, this allows the screen to turn off when we are making a voice call. In addition, if the proximity sensor is correctly calibrated, it will allow us to listen to WhatsApp voice messages through the terminal's speaker . The same happens with the rest of messaging applications, since this sensor is in charge of detecting that we have our Xiaomi stuck to our ears. Of course, the proximity sensor fulfills a highly important functionality such as that our Xiaomi does not turn on accidentally if we have it stored in our pocket . Calibrating the sensor correctly will make the system itself automatically detect that it is stored in our pocket, bag, backpack, etc. How to calibrate the proximity sensor of your Xiaomi, Redmi or POCO If what we want is to calibrate the proximity sensor of a Xiaomi mobile device, whether i