All about the Xiaomi Mi Band 4 【Full Tutorial】

Next we will show you a series of very useful tricks that every owner of a Xiaomi Mi Band 4 should know. Specifically, you will see how to reset it, set an alarm, install new watchfaces , synchronize it with your mobile ... Everything and much more in our tutorial post on the Mi Band 4 !

How to sync and configure your Mi Band 4

With the last tutorial in this post you will learn how to synchronize the Xiaomi Mi Smart Band 4 with your mobile. And you will see that it is as easy as doing the following:

1. To be able to pair with your smartphone, it is obvious that you must have the Mi Fit app installed on your terminal. If you don't have it, you can download it from this link → Download My Fit .
2. Once installed, proceed to log in, and then at the bottom right click on "Profile".
3. In the "My devices" section, tap on "Add device".
4. Choose the "Bracelet" option among all the available options.

1. Now your band will see a message with the text "Pair the phone?" or "Pair the phone?", to which you must press to synchronize it and also in your mi band 4 you must accept the synchronization.
2. Once this is done, the time and date should appear on the screen of your bracelet and a complete message. If not, try all the steps again and make sure you have the mi band 4 near your phone.

How to reset or format the Mi Band 4 [Hard Reset]

This is ideal for erasing all the information stored on the bracelet, and in turn, recovering the factory settings. It is as simple as doing this:

1. Unlock your Mi Band 4 by pressing at the bottom of its screen
2. Swipe up to enter the options menu
3. Find and select the option « More »
4. Enter the " Settings " option

1. Click on " Factory reset "
2. When the warning message appears, touch the check " "From the top to accept the action.

Ready! In a blink of an eye you will have your Mi Band 4 correctly formatted, back to the default settings. Remember that this way, it can be paired with another mobile . And if you want to continue using it with the one you already used, you will have to link it again as we explained in the first part of this tutorial.

How to restart the Mi Band 4

If your device is failing frequently but for no reason you want to do a Hard Reset and erase all the information, then you only have to restart the Xiaomi Mi band 4 as follows:

1. Tap the bottom and slide to enter the options menu
2. Now go to More → Settings → Restart

1. Tap on , to confirm the action
2. And ready! The band will proceed to reboot in a matter of seconds
3. If for any reason your Xiaomi Mi Band 4 does not respond to the touch and that is why you want to restart it, what you will have to do is wait for the battery to drain completely, then charge it completely and turn it on again.

Learn how to set an alarm on the Mi Band 4

As you can see, in this band you can also configure an alarm capable of waking us up with a simple vibration . To program it, do the following:

1. Take your smartphone and go to the Mi Fit application
2. Press the "Profile" option located in the lower right corner of the app

1. In the "Linked devices" section, select your Mi Band 4 to enter the options menu
2. Once in the menu, go to the option «Alarm»

1. Touch "Add" to set the time and days you want the alarm to sound. Don't forget to click on "Save" to confirm!

You can now see your saved alarms in a list, to check that everything is fine.

When the scheduled time arrives, your bracelet will start vibrating and ringing at the same time. To deactivate it, you will have to press the "X", or press "Z" to postpone the alarm for another 10 minutes.

How to download and install funds or Watchfaces on your Mi Band 4

If you are bored of setting the same default themes that your Mi Smart Band 4 brings, you are in luck! Well, this is how you can install new watchfaces on your Xiaomi Band 4:

1. First of all, you must deactivate the Bluetooth of your mobile! In this way the band will not be synchronized; a fundamental requirement to install the new themes correctly.
2. On your smartphone go to Amazfitwatchfaces , choose the theme you like the most and download it, it must be a bin file.

1. Open the Mi Fit app , go to "Bracelet screens" and choose a watchface that you don't like or that you never use, as it will be replaced by the new one. You will only have to learn its design or background image .
2. Head to File Explorer and go to Android → data → com.xiaomi.him.health → files → watch_skin_local.
3. When you're there, look in each folder for the background image of the watchface that you want to replace with the new one. Once you find it, paste in that path or folder, the watchface that you downloaded.
4. Now copy the name of the bin file of the watchface that you are going to replace and then change its name to "BACKUP" . Then put the name you just copied into the previously downloaded watchface.
5. Next, reactivate your mobile's Bluetooth, open the Mi Fit application , go to "Bracelet screens" and click on " Synchronize watch appearance ".

After doing this, the new theme will be recognized by the app and you can now apply it to your Mi Band 4. Do you want to restore the previous watchface? Do everything backwards. Just delete the one you downloaded, and then put the name that the original had.

If what you are looking for is to change the dial of an Amazfit stratos, Bip, Pace or Verge you can follow the tutorial that we did expressly for these watches, here .

How to charge your Mi Band 4 bracelet

Recharging Xiaomi bracelets has always been difficult, but the problem is always the same: detach them from the strap. That is why below you will see how to remove the Mi Band 4 from the rubber strap without much complication.

1. As you know, the band is made up of two parts: the strap and the screen. Well, first you will have to remove the screen by just pressing the back part forward.

1. Then take the charger from the band and attach the part of the screen. Make sure the charger-screen connectors fit perfectly.

1. Finally, you just have to connect the bracelet to your computer or a power outlet to start charging and that's it.
2. As a recommendation, DO NOT BE AFRAID when it comes to removing it from the strap, since it is what can cause the most problems and it is very difficult for you to break the capsule of the Mi Band 4.

How long to charge? In general, it is one hour, but do not complicate it, wait for the screen to show 100% charge and disconnect it from the power and enjoy it.

Where to buy cheap the Xiaomi Mi Band 4

⇨ We hope that these tutorials can help you with any problem you may have with the Xiaomi Mi Band 4 , one of the best-selling Xiaomi smart bracelets thanks to its quality price and that you can get for less than € 23 from Amazon, with full guarantee and security.

Xiaomi Mi Band 4C Smart Activity Tracker Smart Watch 1.08 "Color Screen Activity with Activity Monitors 5 ATM Water Resistant Black

• XIAOMI Mi Band 4C: 1.08-inch screen in LCD technology - unlike Mi Band 4, which is OLED -, with a resolution of 128 by 220 dots, More vivid clearer screen, brightness can be adjusted Raise your wrist to illuminate the screen and touch the palm of your hand to support it.
• New features: In terms of internal specifications, Xiaomi Mi Band 4C has 512 KB of RAM and 8 MB of storage, enough to monitor sleep, detect heart rate, receive notifications and monitor movements throughout the day, as well as five sports: running, walking, cycling, treadmill, and free training.
• 24-hour heart rate monitoring and sleep monitor: Protect your health at all times, 30 minutes automatic heart rate detection triggers, alerts you when your heart rate is too high. Accurately record information about each night's sleep, deep sleep, and light sleep to help you adjust your sleep habits.
• Battery life of 14 days: Mi Smart Band 4C has a battery capacity of 130 mAh, has USB type A charging technology, with a standby time of 14 days; receive and view 100 notifications per day, 2 alarms per day, vibrate for 5 seconds, launch the app every day to sync data.
• 5ATM water resistance rating: Xiaomi Mi Band 4C can work well in 50m underwater, which meets all your daily routines, can be used in showers, swimming pools and dry, but not for saunas and diving. its Bluetooth 5.0 connectivity (the only one it has), allowing it to communicate with the mobile app and receive incoming notifications on the phone.

24.00 EUR

See at the best price

Sale

Original Xiaomi Smart Band 4, Unisex Adults, Black, One Size

• Maximum battery life of 20 days The product is equipped with a high-density lithium polymer battery, which can achieve light weight and up to 20 days of battery life.
• 0.95 "color display upgrade more energy efficient oled displays can display more information with less power; at a glance, you can tell sender's name, number and information
• Best for running when you activate active mode during activities like running, you can measure gps route, calorie expenditure, speed and heart rate in real time. Has the ability to analyze exercise data, recommended for daily health and exercise
• Sleep assist function with heart rate number if you sleep deeply, your heart rate will decrease. Sleep heart rate AIDS measures heart rate during sleep and more accurately measures light and deep sleep patterns. Not compatible with daytime sleep
• Daily step measurement heart rate monitoring You can use an accurate pedometer to measure the changes in your heart rate every day. Update the step counting algorithm. Count your steps correctly. You can monitor your heart rate 24 hours a day to see when it is working. Real time

27.95 EUR

See at the best price