Samsung Galaxy Z Fold 2 5G: Full Specifications Leaked

When the Samsung Galaxy Z Fold 2 5G is officially presented on September 1st, everything about Samsung's latest foldable will be known.

After the device was presented at the beginning of August , the manufacturer kept a low profile with official information such as the technical details or the price. What it should cost was already known on the Internet yesterday. Now the complete technical data follows.

Samsung Galaxy Z Fold 2 specifications

Outer display: 6.23 ″ HD + Super AMOLED, 2,260 x 816 pixels, 25: 9 format, Infinity-O, 60 Hz, HDR10 +
Inner display: 7.6 ″ FullHD + Dynamic AMOLED 2X, 2,208 x 1,768 pixels, 5: 4 format, Infinity-O, 120 Hz, Dynamic Refresh Rate, HDR10 +
OS: Android 10 with One UI 2.5
SoC: Qualcomm Snapdragon 865+
RAM: 12 GB LPDDR5
Storage: 256 GB UFS 3.1
Triple camera: 12 MP (wide angle, f / 1.8, OIS) + 12 MP (ultra wide angle, f / 2.2) + 12 MP (telephoto, f / 2.4)
Front camera: 10 MP (wide angle, f / 2.2) - inside and outside
Battery: 4,500 mAh (fast charging with 25 watts wired and 11 watts wireless, reverse wireless charging
Dimensions / weight: folded 159.2 x 68 x 16.8 mm / unfolded 159.2 x 128.2 x 6.9 mm / 279 g
Special features: fingerprint scanner on the side, 5G

The Samsung Galaxy Z Fold 2 5G is said to be available in Germany for EUR 1,949.00 thanks to the lower VAT of 16 percent. However, this price has not yet been officially confirmed by Samsung; EUR 1,999.00 have also been in the room so far.

Swell):
WinFuture

The post Samsung Galaxy Z Fold 2 5G: Complete Specifications Leaked first appeared on Xiaomist .

Comments

What is VoLTE and how can you activate it on your Xiaomi

In recent years, phone calls have evolved to achieve great sound quality. So much so that today we can find technologies such as VoLTE allowing us to make voice calls in high definition on our Xiaomi. Beyond the classic GSM networks, movistar, vodafone and other operators have integrated this technology, which in turn derives from the advantages of Internet access. Thanks to 4G or LTE networks, VoLTE allows us to make not only high-definition calls, but also to improve consumption and add other services . What is VoLTE and what are its advantages after activating it on a Xiaomi In detail, VoLTE is a technology capable of transmitting voice communications over the Internet . For this, whether we have a Redmi Note 8 Pro, a Xiaomi Mi A2 or any other smartphone from the firm, our voice will be encoded from analog to digital allowing its transmission in the form of packets through the network. With this, as we have already said, after activating VoLTE we will achieve higher sou

So you can check the battery status of your Xiaomi smartphone and how many cycles you have performed

Today, our smartphone has become one of the most important tools in our day to day. That is why the duration of its battery and the state of it is very important if we want to be able to use it with total peace of mind and in a continuous way. In view of this, MIUI includes a secret menu that allows us to verify the state or health of the battery of our Xiaomi smartphone and also check the cycles that we have performed . Let's not forget that each cycle represents a full battery charge from 0% to 100% Since lithium batteries degrade with the passage of time , use and recharges that we have made, knowing these two data will give us a vision of the general state of your state and with it knowing if it has worsened considerably with the passage of weather. How to check the battery status and cycles performed on our Xiaomi smartphone To access this hidden menu in MIUI and check the battery status of our Xiaomi smartphone we will only have to perform the following steps:

How to exit the FASTBOOT mode of your Xiaomi if you have entered accidentally

Although, the fastboot mode of Xiaomi phones with MIUI allows us to solve bugs or change ROMs, it is also common to enter without wanting to. If this has been your case, you most likely want to get out of Xiaomi's fastboot without spoiling anything. In general, leaving this mode that includes all Xiaomi, Redmi and POCO with MIUI is extremely simple. Even so, on certain occasions, exiting fastboot mode is more complex , either because Recovery starts or because our smartphone does not work correctly. In view of this, below we are going to explain how to exit the fastbook mode of your Xiaomi if you have entered without wanting to . In addition, if the conventional mode does not work, we will also give you other tips to exit this mode without causing any damage at the software level. How to exit Xiaomi fastboot If we have accidentally entered the Xiaomi fastboot , to exit this way we will only have to perform the following steps: Press and hold the power button for about 10

How to activate the second space if your Xiaomi does not have this option

MIUI's Second Space functionality allows us to have two smartphones in one. A way to divide our Xiaomi into two different accounts , either for personal and work use, to perform tests or simply, to prevent our son or little brother from accessing our applications and documents. Unfortunately, terminals like the Redmi Note 10 lack this functionality . The same happens with other terminals of Xiaomi, Redmi and POCO of mid-range and entry. If we access the Settings, this functionality is not found among the various MIUI options . Even so, there is a little trick that allows us to access the Second Space functionality even if your Xiaomi does not have it . In this way we can create a second space without any type of restriction and in any Xiaomi, Redmi or POCO. Activate the second space on your Xiaomi If your Xiaomi, Redmi or POCO does not have the Second space functionality when accessing Settings> Special functions , do not worry, below we will explain how to use it with

What is the Safe Mode of your Xiaomi, what is it for and how can you activate it

In addition to the typical options that we find in the MIUI settings, Xiaomi also adds a mode called " Safe Mode " or " Safe Mode " to its smartphones. We will talk about this below, explaining its usefulness and how to activate or deactivate it on your Xiaomi, Redmi or POCO. Safe Mode allows us to start a special boot, loading only the system itself and the applications that were installed on our Xiaomi when we bought it. That is, starting the Safe Mode or Safe Mode our smartphone will start loading only the essential applications . This mode is a temporary state of our smartphone and does not make any important modification on the device. In itself, Safe Mode does not delete our data , it just starts our Xiaomi, loading the basics and essentials for its operation. Safe Mode only starts essential MIUI applications. Thanks to this, the Safe Mode will help us to rule out failures in our Xiaomi derived from the installation of an application or the modific

If your Xiaomi disconnects only from the WiFi it may be because of that MIUI setting

One of the most common problems in Xiaomi smartphones is usually related to the WiFi connection and its automatic disconnection . A quite annoying problem, which in most cases is usually caused by a bad MIUI configuration . If you have a Xiaomi, Redmi or POCO and you notice that sometimes your smartphone disconnects only from the WiFi without having taken any action, do not miss this article where we tell you how to solve it in most cases. Disconnection of WiFi on your Xiaomi, how to solve it Although it is true that the problem may be caused by some other failure, in most cases the spontaneous disconnection of the WiFi connection is caused by a bad MIUI configuration, specifically, its automatic connection to the networks with better signal . By having this option activated on our smartphone, if the WiFi signal drops at any time, it will automatically disconnect to use the data connection . To deactivate it enough to do the following steps: Go to Settings> WiFi> Wi-Fi

Does your Xiaomi charge slowly or intermittently? So you can fix it

Does your Xiaomi charge very slowly or intermittently? This error is usually very common when our cable is in poor condition, we use a low-quality charger or even when the USB or USB Type-C port of your Xiaomi is dirty or obstructed. With a view to this, below we will explain the main steps or solutions to take if your Xiaomi charges slowly , if the charge is intermittent or if in the worst case, your mobile does not detect the USB that is connected to the socket electric. 1. Clean the USB port Although it may sound simple, in most cases slow charging problems are usually caused by a piece of paper or a speck of dust that obstructs the pins of the USB port . Taking into account the nature of this connector, it is normal that after repeated use dirt accumulates inside. A dirty USB C port is usually the main cause of slow or intermittent charging. To solve this charging problem and clean the USB C port of your Xiaomi, it is recommended to blow lightly inside the port itself.

Problems with Android Auto and your Xiaomi? So you can fix it

Unfortunately Android Auto continues to present certain problems on some Xiaomi . Errors such as error 16 that prevent our smartphone from correctly linking to this Google vehicle system. Still, these bugs are largely solvable. And it is that, in most cases the impossibility of using Android Auto through our Xiaomi is given by the dual applications themselves. In view of this and taking as a source this interesting article from Mi Community , below we will explain how to solve two of the most common errors that we usually find when linking or connecting our Xiaomi to a car with Android Auto. Fix Android Auto error on Xiaomi devices One of the main errors of the type « An error has occurred » that we usually find when connecting Android Auto to our Xiaomi is related to Google Play Services . In itself, this error shows the message « It seems that Google Play Services does not work at the moment «, making it impossible to connect Android Auto to our Xiaomi. To solve it we j

So you can activate the double tap on MIUI to wake up or turn on the screen of your Xiaomi

Among all the functionalities that we can find in MIUI, today we want to talk about the double tap on the screen . This functionality allows us after activation to wake up the screen of our Xiaomi with a double click on it. This will avoid having to press the power button or having to position our finger on the fingerprint recognition area. An extremely useful utility, which can also be used in case the power button stops working. In this way, the functionality " Double tap on the screen to wake up " will allow us to turn on or off the screen of our mobile in a quick and simple way by just doing a double tap on your XIaomi.i How to activate the double tap to wake up the screen of a Xiaomi mobile To activate the double tap functionality on the screen of your Xiaomi we only have to make the following settings: Go to Settings> Lock screen Activate Double tap on screen to wake up After its activation we will only have to double-click on the off screen of our X

How to show two clocks on the screen of your Xiaomi (Dual Clock)

After its debut in MIUI 10, Xiaomi's customization layer allows us to add two watches to the home and lock screen . This function is called " Dual Clock " and among other advantages, it allows us to always be informed of the time in another time zone or country. In addition, the Dual Clock function that Xiaomi offers us also integrates with MIUI's Always on Display mode. Thanks to this we can visualize the two clocks with the terminal blocked , without consuming an excess of energy. A utility without a doubt quite interesting, especially for all those who telework through a headquarters in another country, who have relatives abroad or who simply want to be informed of what time it is in another part of the planet. How to activate the MIUI dual clock and show two clocks on your Xiaomi To activate the MIUI Dual Clock function and show two clocks on the screen of our Xiaomi , either in the home screen , lock or through the Always on Display, we will only have

Xiaomi News

Search This Blog

Featured Question

TEAMGROUP Unveils T-FORCE SIREN GD120S AIO SSD Cooler