Skip to main content

Featured Question

Mobile World Congress will remain in Barcelona until 2030

The MWC is one of the largest technology congresses in the world. And since 2006 the fair has been held in Barcelona. And as you can now read, it will continue to do so. The GSMA and the venue have agreed on an extension. The GSMA is the annual organizer and has now confirmed that the MWC will remain in Barcelona until at least 2030. The current contract was valid until 2023. So under the new contract, the GSMA will now hold the MWC until at least Barcelona. Before the 2006 Barcelona Fair came, it was held in Rome, Nice, Berlin, Lisbon, Athens, Madrid and Cannes. What will happen after 2030 is currently unclear. Maybe it will be extended by more years or you will move to new realms. Sources): TechRadar The article Mobile World Congress stays in Barcelona until 2030 appeared first on xiaomist's blog .

Here is the basic Sony A6100 and flagship A6600. Sony with a strong offensive in the APS-C segment

Two new Sony mirrorless cameras are to be released today: the basic A6100 and the flagship A6600. We already know everything about them.

According to the well-informed Sony Alpha Rumors website, Sony will present today two new camera models: A6100 and A6600 . The information about them has not been confirmed (the Polish branch of Sony does not comment on the case), but the leak includes product brochures with the full specifications of both cameras . So we know everything about them.

Sony A6100 and A6600, or which camera for whom?

sony a6100 a6600

Non-intuitive naming is Sony's hallmark, and so it is in this case. After the A6000, A6300, A6500 and A6400 (in that order they were presented), the time has come for two new models: A6100 and A6600. What's worse, they all look almost the same, so I suspect customers will be very confused.

The brochure shows that Sony intends to replace the old generation with new cameras. The A6000, A6300 and A6500 are likely to give way to the new three: A6100, A6400 and A6600.

Sony A6100 is the simplest APS-C model, focused mainly on photographing.

sony a6100 a6600

The new Sony camera is based on the well-known Exmor CMOS APS-C format with 24.2 megapixels. It operates at ISO 100-32000, expandable to 51200. The camera records RAW images with 14-bit depth.

In terms of speed, the A6100 falls just like the more expensive A6400 and A6600. It offers 11 fps with full AF and AE tracking, and the Fast Hybrid AF system based on 425 AF points focus in 0.02 s. Here is the famous Eye AF working on photos.

The camera records XAVC S movies in 4K at 24 or 30 fps (100 Mbps). Full HD mode reaches up to 120 fps (100 Mbps). The camera allows you to connect an external microphone and supports displaying sound levels during recording. However, there is an important difference from the A6400 and A6600 models: in the A6100 we will not find flat image profiles S-Log2, S-Log3 and HLG. There is also no Eye AF function in movies.

sony a6100 a6600

We can frame on a tilted 180 degree touch screen similar to the one on A6400 (3 inches, 921 thousand points). There is also a built-in OLED viewfinder, which, however, has a clearly lower resolution than the more expensive models: 1.44 million dots instead of 2.35 million. The housing also houses a built-in flash and one SD card slot (UHS-I). There were also Wi-Fi, Bleutooth, NFC and hot shoe. The NP-FW50 battery will allow for 380 photos, and the camera with the battery has a weight of only 396 g.

Sony A6600 is the flagship mirrorless shelf of the APS-C.

sony a6100 a6600

Sony A6600 is by far the best APS-C mirrorless camera in the Japanese offer. We will see the new products on the housing, because the camera has a much deeper grip, thanks to which it should lie better in the hand. The Grip also houses a Z-type battery, known from full-frame Sony cameras, which according to the manufacturer will provide 2.2x more photos on a single charge. It is a pity that the new grip still lacks the front adjustment wheel.

The camera is built around a stabilized Exmor CMOS sensor with 24.2 megapixel resolution, operating at sensitivities up to ISO 32000, expandable to 102400. The stabilization works in five axes and has an efficiency of 5 EV. The camera is built around a magnesium alloy skeleton, and the shutter has a lifetime of 200,000. cycles.

sony a6100 a6600

Autofocus is based on the Fast Hybrid AF system, which has 425 AF points and focuses in 0.02 seconds. Live tracking and face and eye detection works on both photos and movies.

And if we're at the movies, the Sony A6600 offers everything that Sony's best cameras, including support for S-Log2 / S-Log3 / HLG profiles. However, we do not have a breakthrough in terms of video, because the specification remains the same. The camera records a 4K image at 30 fps at 100 Mbps, reading the entire matrix (6K area) and using oversampling up to 4K, without skipping pixels. However, there is a new device, i.e. a headphone jack added next to the microphone jack.

On the back we find a 180 degree tilt LCD touch screen as well as an OLED viewfinder with a resolution of 2.35 million points. In addition, the distribution of elements and buttons does not differ from what Sony is used to. The body with the battery weighs 503 g.

There are also two new lenses. One of them is the long-awaited bright zoom in the basic range.

Sony E 16-55mm F2.8 G is the first novelty in the lens segment. This is a bright reporter zoom with a standard focal range equivalent to 24-82 mm in full frame. Such a lens was very lacking in the Sony system.

The second novelty is the Sony E 70-350mm F4.5-6.3 G OSS lens, i.e. an optically stabilized long zoom with the focal length equivalent of 105-55 mm for full frame. This is an offer for people who want to zoom in as much as possible.

sony a6100 a6600

The new lenses, especially 16-55mm f / 2.8, promise to be very good. In turn, the new bodies are also a great addition to the series. The A6000 is quite far from modern reality, so replacing it with the A6100 is completely natural. The camera is well balanced and in terms of speed and quality of photos will not stand out from the big brothers.

In turn, the A6600 seems too conservative. Sony could be tempted by an additional SD card slot, the front wheel settings, or finally a joystick to change the AF fields. All these elements can be found at the competition. In terms of video, there is also no significant improvement over what the 2016 A6300 offered.

It also seems that Sony has abandoned the cheapest and simplest A5100 series, which is a pity. I would love to see a newer design without a viewfinder, but with a new sensor, better AF and 4K recording.



Here is the basic Sony A6100 and flagship A6600. Sony with a strong offensive in the APS-C segment

Comments

Popular Questions This Week

Problems with Android Auto and your Xiaomi? So you can fix it

Unfortunately Android Auto continues to present certain problems on some Xiaomi . Errors such as error 16 that prevent our smartphone from correctly linking to this Google vehicle system. Still, these bugs are largely solvable. And it is that, in most cases the impossibility of using Android Auto through our Xiaomi is given by the dual applications themselves. In view of this and taking as a source this interesting article from Mi Community , below we will explain how to solve two of the most common errors that we usually find when linking or connecting our Xiaomi to a car with Android Auto. Fix Android Auto error on Xiaomi devices One of the main errors of the type « An error has occurred » that we usually find when connecting Android Auto to our Xiaomi is related to Google Play Services . In itself, this error shows the message « It seems that Google Play Services does not work at the moment «, making it impossible to connect Android Auto to our Xiaomi. To solve it we j

What is VoLTE and how can you activate it on your Xiaomi

In recent years, phone calls have evolved to achieve great sound quality. So much so that today we can find technologies such as VoLTE allowing us to make voice calls in high definition on our Xiaomi. Beyond the classic GSM networks, movistar, vodafone and other operators have integrated this technology, which in turn derives from the advantages of Internet access. Thanks to 4G or LTE networks, VoLTE allows us to make not only high-definition calls, but also to improve consumption and add other services . What is VoLTE and what are its advantages after activating it on a Xiaomi In detail, VoLTE is a technology capable of transmitting voice communications over the Internet . For this, whether we have a Redmi Note 8 Pro, a Xiaomi Mi A2 or any other smartphone from the firm, our voice will be encoded from analog to digital allowing its transmission in the form of packets through the network. With this, as we have already said, after activating VoLTE we will achieve higher sou

If your Xiaomi disconnects only from the WiFi it may be because of that MIUI setting

One of the most common problems in Xiaomi smartphones is usually related to the WiFi connection and its automatic disconnection . A quite annoying problem, which in most cases is usually caused by a bad MIUI configuration . If you have a Xiaomi, Redmi or POCO and you notice that sometimes your smartphone disconnects only from the WiFi without having taken any action, do not miss this article where we tell you how to solve it in most cases. Disconnection of WiFi on your Xiaomi, how to solve it Although it is true that the problem may be caused by some other failure, in most cases the spontaneous disconnection of the WiFi connection is caused by a bad MIUI configuration, specifically, its automatic connection to the networks with better signal . By having this option activated on our smartphone, if the WiFi signal drops at any time, it will automatically disconnect to use the data connection . To deactivate it enough to do the following steps: Go to Settings> WiFi> Wi-Fi

How to exit the FASTBOOT mode of your Xiaomi if you have entered accidentally

Although, the fastboot mode of Xiaomi phones with MIUI allows us to solve bugs or change ROMs, it is also common to enter without wanting to. If this has been your case, you most likely want to get out of Xiaomi's fastboot without spoiling anything. In general, leaving this mode that includes all Xiaomi, Redmi and POCO with MIUI is extremely simple. Even so, on certain occasions, exiting fastboot mode is more complex , either because Recovery starts or because our smartphone does not work correctly. In view of this, below we are going to explain how to exit the fastbook mode of your Xiaomi if you have entered without wanting to . In addition, if the conventional mode does not work, we will also give you other tips to exit this mode without causing any damage at the software level. How to exit Xiaomi fastboot If we have accidentally entered the Xiaomi fastboot , to exit this way we will only have to perform the following steps: Press and hold the power button for about 10

Does your Xiaomi charge slowly or intermittently? So you can fix it

Does your Xiaomi charge very slowly or intermittently? This error is usually very common when our cable is in poor condition, we use a low-quality charger or even when the USB or USB Type-C port of your Xiaomi is dirty or obstructed. With a view to this, below we will explain the main steps or solutions to take if your Xiaomi charges slowly , if the charge is intermittent or if in the worst case, your mobile does not detect the USB that is connected to the socket electric. 1. Clean the USB port Although it may sound simple, in most cases slow charging problems are usually caused by a piece of paper or a speck of dust that obstructs the pins of the USB port . Taking into account the nature of this connector, it is normal that after repeated use dirt accumulates inside. A dirty USB C port is usually the main cause of slow or intermittent charging. To solve this charging problem and clean the USB C port of your Xiaomi, it is recommended to blow lightly inside the port itself.

So you can check the battery status of your Xiaomi smartphone and how many cycles you have performed

Today, our smartphone has become one of the most important tools in our day to day. That is why the duration of its battery and the state of it is very important if we want to be able to use it with total peace of mind and in a continuous way. In view of this, MIUI includes a secret menu that allows us to verify the state or health of the battery of our Xiaomi smartphone and also check the cycles that we have performed . Let's not forget that each cycle represents a full battery charge from 0% to 100% Since lithium batteries degrade with the passage of time , use and recharges that we have made, knowing these two data will give us a vision of the general state of your state and with it knowing if it has worsened considerably with the passage of weather. How to check the battery status and cycles performed on our Xiaomi smartphone To access this hidden menu in MIUI and check the battery status of our Xiaomi smartphone we will only have to perform the following steps:

Improve and amplify the volume of your Xiaomi and / or headphones with these simple adjustments

With the evolution of technology and the arrival of content on demand, many of us spend much of the day with our headphones on, playing music or watching series and movies. That is why many of you have asked us how to increase the volume of the headphones in Xiaomi smartphones or even how to improve the sound quality in Xiaomi AirDots or Redmi AirDots S wireless headphones. How to improve the sound and increase the volume of the headphones in MIUI of Xiaomi If what we want is to increase or amplify the volume of our headphones on a Xiaomi smartphone with MIUI we must perform the following steps: Go to Settings app> Region We will change our region to Andorra, India or any other country outside the EU. With this adjustment we will be able to "skip" the European restrictions that limit the sound volume, obtaining greater amplification , both in headphones, and through the speaker itself. Headphones with cable and jack connector Xiaomi Mi Hybrid Pro HD. In add

How to change the font in MIUI and thus further customize your Xiaomi: so you can change the type, color and size of the letters of MIUI

Among the multiple options that MIUI offers us we find the possibility of changing the source of our Xiaomi . This option will not only allow us to change the font , but also change the font color and size . For this it is necessary to make use of some Asian region, be it India, Hong Kong or any other. In addition, it should be noted that this adjustment that allows us to change the source is only available for MIUI 9 , MIUI 10 and MIUI 11 , so if we have a Xiaomi Mi A2 or Xiaomi Mi A3 we will not be able to do it. How to change the font in MIUI To change the font in MIUI we must perform the following steps: Go to Settings> Additional settings> Region Next we select India or Hong Kong as a region. Go to the Themes application, download the font that we like the most from the new lower option that will appear with hundreds of fonts and then apply it. After applying it, it will be necessary to restart our Xiaomi mobile. Once done , we will have installed the ne

How to calibrate the proximity sensor of your Xiaomi

The proximity sensor forms one of the fundamental parts of a smartphone. Whether it is in a Xiaomi Mi A3 , a Redmi Note 8 Pro or any other smartphone from the firm, this allows the screen to turn off when we are making a voice call. In addition, if the proximity sensor is correctly calibrated, it will allow us to listen to WhatsApp voice messages through the terminal's speaker . The same happens with the rest of messaging applications, since this sensor is in charge of detecting that we have our Xiaomi stuck to our ears. Of course, the proximity sensor fulfills a highly important functionality such as that our Xiaomi does not turn on accidentally if we have it stored in our pocket . Calibrating the sensor correctly will make the system itself automatically detect that it is stored in our pocket, bag, backpack, etc. How to calibrate the proximity sensor of your Xiaomi, Redmi or POCO If what we want is to calibrate the proximity sensor of a Xiaomi mobile device, whether i

What is the Safe Mode of your Xiaomi, what is it for and how can you activate it

In addition to the typical options that we find in the MIUI settings, Xiaomi also adds a mode called " Safe Mode " or " Safe Mode " to its smartphones. We will talk about this below, explaining its usefulness and how to activate or deactivate it on your Xiaomi, Redmi or POCO. Safe Mode allows us to start a special boot, loading only the system itself and the applications that were installed on our Xiaomi when we bought it. That is, starting the Safe Mode or Safe Mode our smartphone will start loading only the essential applications . This mode is a temporary state of our smartphone and does not make any important modification on the device. In itself, Safe Mode does not delete our data , it just starts our Xiaomi, loading the basics and essentials for its operation. Safe Mode only starts essential MIUI applications. Thanks to this, the Safe Mode will help us to rule out failures in our Xiaomi derived from the installation of an application or the modific