Skip to main content

Featured Question

Mobile World Congress will remain in Barcelona until 2030

The MWC is one of the largest technology congresses in the world. And since 2006 the fair has been held in Barcelona. And as you can now read, it will continue to do so. The GSMA and the venue have agreed on an extension. The GSMA is the annual organizer and has now confirmed that the MWC will remain in Barcelona until at least 2030. The current contract was valid until 2023. So under the new contract, the GSMA will now hold the MWC until at least Barcelona. Before the 2006 Barcelona Fair came, it was held in Rome, Nice, Berlin, Lisbon, Athens, Madrid and Cannes. What will happen after 2030 is currently unclear. Maybe it will be extended by more years or you will move to new realms. Sources): TechRadar The article Mobile World Congress stays in Barcelona until 2030 appeared first on xiaomist's blog .

Read while sitting. The new robots of iRobot cost almost PLN 10,000

Despite the fact that since the premiere of Roomba i7 and i7 + models passed less than a year, iRobot does not slow down the pace and showed the next generation of their devices. The Roomba S9 + vacuuming robot and the Braava Jet M6 mopping robot are appliances that can shock not only by their capabilities but also by high prices.

iRobot Roomba S9 + at first glance stands out above all in shape. We do not deal here with a round casing known from other Roomba robots, but with a D-shaped one. Thus, the latest model of the iRobot more than its predecessors resembles competitors from the Electrolux or Neato stables .

Antoine Garcia, an engineer from iRobot, whom I had the opportunity to talk to, claims, however, that we are not dealing with copying the competition because the US company patented a D-shaped robot already in 2009. What's more, the company still thinks that round robots they are better than others because they have no problems with entering and leaving hard-to-reach places. Therefore, the vast majority of iRobots will still be round. At least for now.

Why, then, did the Roomba S9 + come into being at all?

For two reasons. The first is that iRobot has developed a technology that overcomes the drawbacks of a non-standard robot shape. It is a new navigation system that uses not only a very sensitive camera located on the top of the robot, but also a sensor located on its front and using infrared rays, which scans the room 25 times per second, detecting any obstacles.

Thanks to the redesign of the device, it was possible to put rubber rollers acting as turbo nozzles in the front part of the robot. Thanks to that, they are 30 percent. wider and take away a lot more dirt.

Next to them, a single side brush was placed, which takes away the impurities to turboszczotek. Thanks to this, the robot has to deal better with nooks and crannies. After the movement of the Roomba S9 + model, it can be seen that engineers devoted the most attention to this element. In fact, the robot adheres very closely to the wall, and when cleaning the horns, stops for a moment to scrape any impurities out of them.

In fact, I do not see the sense of using this solution, because it provides better cleaning in relation to rounders and Robots for marginal values. Sam used the 880, 980 models, and now I use Roomba i7 and my apartment, including corners, are simply clean. So this is the solution for the most a grease demanding users.

We also have many previously known functions

The iRobot Roomba S9 + is also a more powerful engine than its predecessor. Already in the standard mode it works as well as 980 and i7 models, and in Power Boost mode it achieves even better results. This mode (formerly known as Carpet Boost) was not available in the i7 model and returned only now. In addition, the iRobot Home application allows you to precisely adjust the robot's power, and hence its volume, to your needs.

Other interesting features available in this robot were already available in the i7 model . These are the ability to recognize specific rooms and send a robot to them using the application or Google Assistant and support for the Clean Base station, which sucks dust from the robot.

At this point, it is worth mentioning that the iRobot Roomba S9 +, unlike its predecessor, will only be available in the set with the station. This is a good solution, because it allows you to empty the robot container not every few days, but a few months. The Clean Base station of my Roomby i7 was first launched at the end of January and its sack was emptied in mid-May. This accessory completely changes the way we use the cleaning robot.

Another novelty: the mava-jet mava robot m6

This is another model from the slightly neglected Braava series. The previous model Braava Jet 240 was the best mopping device on the market, but it still lacked a lot to be perfect. In the new model, most of them have been removed. The proof of this is, for example, the use of the new navigation system iAdapt 3.0, which supports mapping and room recognition.

The vast majority of mopping robots on the market are hybrid devices that combine the functions of a dry and wet cleaning robot. In a nutshell, it looks like we change the dirt container into a water container with a cloth attached. The solution is as simple as it is impractical, because it does not clean up, it only smears the impurities on the floor.

Braava robots work completely differently

First of all, they have a sprayer at the front, which first moisturizes the floor with water and detergent, and then with the help of pressure and a suitable cloth, wipe off impurities. The construction of the robot also means that, unlike vacuum cleaners, it does not drive onto carpets. This is a huge plus.

Braava Jet m6 also has other advantages. Its tank has a capacity of 0.5 liters, which allows you to clean the area of ​​100 sq m. Do you have a smaller apartment? Thus, after finishing the mopping, the robot returns to the docking station and the remaining part of the water will be used on the next occasion.

The most interesting, however, is that the Braava Jet m6 works with the vacuuming robots Roomba S9 + and i7, and I'm not just talking about the fact that both these devices can be operated using one application. After cleaning, the vacuum cleaner will send information to its colleague to start wet cleaning. We're dealing here with a really useful use of the Internet of Things.

New robots will be available only to customers with a thick wallet

The prices of new iRobots are very, very high. Roomba S9 + will cost as much as PLN 6,799. It's a lot, but it's worth remembering that we get the Clean Base station in the set. It is, therefore, a price over PLN 1000 higher than in the case of the analogous i7 + model. In turn, the mava robot Jet m6 will cost 3199 PLN. This means that people who decide to buy both equipment will have to get ready for an expense of almost PLN 10,000.

That's a lot, but for this amount we get the best cleaning jobs on the market. When we add to this great sales of previous models (costing over PLN 4,000) on the Vistula River, I have no doubt that many people will decide on them. iRobot is like the Apple market of cleaning robots not only in terms of quality, but also the price and loyalty of the brand's fans.

Read while sitting. The new robots of iRobot cost almost PLN 10,000


Popular Questions This Week

Problems with Android Auto and your Xiaomi? So you can fix it

Unfortunately Android Auto continues to present certain problems on some Xiaomi . Errors such as error 16 that prevent our smartphone from correctly linking to this Google vehicle system. Still, these bugs are largely solvable. And it is that, in most cases the impossibility of using Android Auto through our Xiaomi is given by the dual applications themselves. In view of this and taking as a source this interesting article from Mi Community , below we will explain how to solve two of the most common errors that we usually find when linking or connecting our Xiaomi to a car with Android Auto. Fix Android Auto error on Xiaomi devices One of the main errors of the type « An error has occurred » that we usually find when connecting Android Auto to our Xiaomi is related to Google Play Services . In itself, this error shows the message « It seems that Google Play Services does not work at the moment «, making it impossible to connect Android Auto to our Xiaomi. To solve it we j

What is VoLTE and how can you activate it on your Xiaomi

In recent years, phone calls have evolved to achieve great sound quality. So much so that today we can find technologies such as VoLTE allowing us to make voice calls in high definition on our Xiaomi. Beyond the classic GSM networks, movistar, vodafone and other operators have integrated this technology, which in turn derives from the advantages of Internet access. Thanks to 4G or LTE networks, VoLTE allows us to make not only high-definition calls, but also to improve consumption and add other services . What is VoLTE and what are its advantages after activating it on a Xiaomi In detail, VoLTE is a technology capable of transmitting voice communications over the Internet . For this, whether we have a Redmi Note 8 Pro, a Xiaomi Mi A2 or any other smartphone from the firm, our voice will be encoded from analog to digital allowing its transmission in the form of packets through the network. With this, as we have already said, after activating VoLTE we will achieve higher sou

If your Xiaomi disconnects only from the WiFi it may be because of that MIUI setting

One of the most common problems in Xiaomi smartphones is usually related to the WiFi connection and its automatic disconnection . A quite annoying problem, which in most cases is usually caused by a bad MIUI configuration . If you have a Xiaomi, Redmi or POCO and you notice that sometimes your smartphone disconnects only from the WiFi without having taken any action, do not miss this article where we tell you how to solve it in most cases. Disconnection of WiFi on your Xiaomi, how to solve it Although it is true that the problem may be caused by some other failure, in most cases the spontaneous disconnection of the WiFi connection is caused by a bad MIUI configuration, specifically, its automatic connection to the networks with better signal . By having this option activated on our smartphone, if the WiFi signal drops at any time, it will automatically disconnect to use the data connection . To deactivate it enough to do the following steps: Go to Settings> WiFi> Wi-Fi

How to exit the FASTBOOT mode of your Xiaomi if you have entered accidentally

Although, the fastboot mode of Xiaomi phones with MIUI allows us to solve bugs or change ROMs, it is also common to enter without wanting to. If this has been your case, you most likely want to get out of Xiaomi's fastboot without spoiling anything. In general, leaving this mode that includes all Xiaomi, Redmi and POCO with MIUI is extremely simple. Even so, on certain occasions, exiting fastboot mode is more complex , either because Recovery starts or because our smartphone does not work correctly. In view of this, below we are going to explain how to exit the fastbook mode of your Xiaomi if you have entered without wanting to . In addition, if the conventional mode does not work, we will also give you other tips to exit this mode without causing any damage at the software level. How to exit Xiaomi fastboot If we have accidentally entered the Xiaomi fastboot , to exit this way we will only have to perform the following steps: Press and hold the power button for about 10

Does your Xiaomi charge slowly or intermittently? So you can fix it

Does your Xiaomi charge very slowly or intermittently? This error is usually very common when our cable is in poor condition, we use a low-quality charger or even when the USB or USB Type-C port of your Xiaomi is dirty or obstructed. With a view to this, below we will explain the main steps or solutions to take if your Xiaomi charges slowly , if the charge is intermittent or if in the worst case, your mobile does not detect the USB that is connected to the socket electric. 1. Clean the USB port Although it may sound simple, in most cases slow charging problems are usually caused by a piece of paper or a speck of dust that obstructs the pins of the USB port . Taking into account the nature of this connector, it is normal that after repeated use dirt accumulates inside. A dirty USB C port is usually the main cause of slow or intermittent charging. To solve this charging problem and clean the USB C port of your Xiaomi, it is recommended to blow lightly inside the port itself.

So you can check the battery status of your Xiaomi smartphone and how many cycles you have performed

Today, our smartphone has become one of the most important tools in our day to day. That is why the duration of its battery and the state of it is very important if we want to be able to use it with total peace of mind and in a continuous way. In view of this, MIUI includes a secret menu that allows us to verify the state or health of the battery of our Xiaomi smartphone and also check the cycles that we have performed . Let's not forget that each cycle represents a full battery charge from 0% to 100% Since lithium batteries degrade with the passage of time , use and recharges that we have made, knowing these two data will give us a vision of the general state of your state and with it knowing if it has worsened considerably with the passage of weather. How to check the battery status and cycles performed on our Xiaomi smartphone To access this hidden menu in MIUI and check the battery status of our Xiaomi smartphone we will only have to perform the following steps:

Improve and amplify the volume of your Xiaomi and / or headphones with these simple adjustments

With the evolution of technology and the arrival of content on demand, many of us spend much of the day with our headphones on, playing music or watching series and movies. That is why many of you have asked us how to increase the volume of the headphones in Xiaomi smartphones or even how to improve the sound quality in Xiaomi AirDots or Redmi AirDots S wireless headphones. How to improve the sound and increase the volume of the headphones in MIUI of Xiaomi If what we want is to increase or amplify the volume of our headphones on a Xiaomi smartphone with MIUI we must perform the following steps: Go to Settings app> Region We will change our region to Andorra, India or any other country outside the EU. With this adjustment we will be able to "skip" the European restrictions that limit the sound volume, obtaining greater amplification , both in headphones, and through the speaker itself. Headphones with cable and jack connector Xiaomi Mi Hybrid Pro HD. In add

How to change the font in MIUI and thus further customize your Xiaomi: so you can change the type, color and size of the letters of MIUI

Among the multiple options that MIUI offers us we find the possibility of changing the source of our Xiaomi . This option will not only allow us to change the font , but also change the font color and size . For this it is necessary to make use of some Asian region, be it India, Hong Kong or any other. In addition, it should be noted that this adjustment that allows us to change the source is only available for MIUI 9 , MIUI 10 and MIUI 11 , so if we have a Xiaomi Mi A2 or Xiaomi Mi A3 we will not be able to do it. How to change the font in MIUI To change the font in MIUI we must perform the following steps: Go to Settings> Additional settings> Region Next we select India or Hong Kong as a region. Go to the Themes application, download the font that we like the most from the new lower option that will appear with hundreds of fonts and then apply it. After applying it, it will be necessary to restart our Xiaomi mobile. Once done , we will have installed the ne

How to calibrate the proximity sensor of your Xiaomi

The proximity sensor forms one of the fundamental parts of a smartphone. Whether it is in a Xiaomi Mi A3 , a Redmi Note 8 Pro or any other smartphone from the firm, this allows the screen to turn off when we are making a voice call. In addition, if the proximity sensor is correctly calibrated, it will allow us to listen to WhatsApp voice messages through the terminal's speaker . The same happens with the rest of messaging applications, since this sensor is in charge of detecting that we have our Xiaomi stuck to our ears. Of course, the proximity sensor fulfills a highly important functionality such as that our Xiaomi does not turn on accidentally if we have it stored in our pocket . Calibrating the sensor correctly will make the system itself automatically detect that it is stored in our pocket, bag, backpack, etc. How to calibrate the proximity sensor of your Xiaomi, Redmi or POCO If what we want is to calibrate the proximity sensor of a Xiaomi mobile device, whether i

What is the Safe Mode of your Xiaomi, what is it for and how can you activate it

In addition to the typical options that we find in the MIUI settings, Xiaomi also adds a mode called " Safe Mode " or " Safe Mode " to its smartphones. We will talk about this below, explaining its usefulness and how to activate or deactivate it on your Xiaomi, Redmi or POCO. Safe Mode allows us to start a special boot, loading only the system itself and the applications that were installed on our Xiaomi when we bought it. That is, starting the Safe Mode or Safe Mode our smartphone will start loading only the essential applications . This mode is a temporary state of our smartphone and does not make any important modification on the device. In itself, Safe Mode does not delete our data , it just starts our Xiaomi, loading the basics and essentials for its operation. Safe Mode only starts essential MIUI applications. Thanks to this, the Safe Mode will help us to rule out failures in our Xiaomi derived from the installation of an application or the modific