Home Camera 2, like the Nest Dropcam Pro, looks like a hockey ball but the base of the camera is instead of a black white. The black camera is a circular shape with a diameter of 2 inches. The CMOS sensor is 1 / 2.8 inches and has 11 LEDs for night vision. The camera supports 720p and 1080p resolution and has 130 degrees of view. Inside this camera, in addition to the motion sensor, a microphone and speaker are also available for two-way communication. The power jack on this camera is on its base. You can also change the angle to 180 degrees using the hinges on the base.
The rear panel of the camera can be removed to access the memory card slot and reset key. Inside the package, this 32-megabyte memory card comes with a USB power adapter. You can control this camera using Android (Android) and iOS (Android) software, but unfortunately, there's no web application provided. When you open the software, you will be able to find the cursing child by advertising. This ad is only played for 3 seconds, but every time you run the software, the ad will also be played. After a while, this issue will be annoying. On the Home screen, you can see all the installed cameras and see a still image of the last registered activity.
In the upper right corner of the software, there is a "+" sign that you can use to add new cameras. 4 other keys are located at the bottom of the screen. The camera key allows you to view live camera images. The alert button will show you all recorded activities with history along with a thumbnail of the video. The album key will show you all the photos you take. You can also edit your own information, password and profile image using the profile key. Tapping on the camera icon moves to another page. Underneath this page there are several keys that allow you to mute the speakerphone, record video, activate two-way audio, record still images, and watch video in full-screen mode.
By tapping on the gear icon, you will be taken to the settings screen, which you can change the name of the camera or turn it on / off. You can also enable activation alerts on this page, check the contents of the memory card, turn on video recording in case of sensing activity, or enable access to the camera using the pin. Using this page, you can select parts of the image that only if the activity is viewed in these areas the motion sensor is activated, or only if enabled by human observation. You can select three levels of activity for this sensor, or set scheduling for only certain hours of activity alerts.
Unfortunately, this camera can not send alerts to you and can only send them to the software. Also, it can not be connected to other home devices. Camera shots include image rotation, lens deviation, speaker off / on, and three different HD settings. It can detect gestures and send a ten-second video to your friends or family. To enable this feature, you should take your palm up above the shoulder height of the camera. If your hand is detected, the camera will notify you of this subject with a voice command and if you tap your hand Video recording starts. As mentioned, the camera also detects crying sounds and sends an alert to your phone if your baby cries.